Exchangeable module dual-port memory – PROFIBUS DP

The universal Exchangeable Module netJACK with its PCI Express interface addresses in particular the embedded market with high-performance CPUs like Intel Atom®. Alternatively, there are versions with a traditional dual-port memory and a fast serial SPI interface.

All variants have the compact design of a closed IP40 module which can be mounted without using tools. Additional costs for the exchangeable module will not incur because connector and mounting rails are designed as contact areas or cut-outs on the host system.

netJACK can be mounted quickly and easily – right before shipment or later by the end customer.

With netJACK, customers can realize the full range of communication solutions, e. g. for drives, HMI systems, or ident systems. Additional functions, e. g. soft-PLC, visualization or applications developed by the customer are possible, too. For customer-specific requirements, Hilscher offers a cost-optimized Design and Production Service.

Due to the Hilscher network controller netX, a 10-year delivery guarantee is granted.

  • Universal interface of PROFIBUS DP (Master or Slave) in closed IP40 housing
  • Simple plug-in installation without tools
  • Master or slave on the same hardware
  • No additional components required for mounting and connecting to the carrier board
  • Host connection via dual-port memory
ProductPart number1623.400
Brief descriptionExchangeable Module Dual-port memory - PROFIBUS DP
Communication controllernetXnetX 100
Integrated MemoryRAM8 MB SDRAM
FLASH4 MB serial Flash EPROM
Power supply and currentSupply voltage+3.3 V ± 5 % DC
Typical/maximum current434-500 mA
Typical power consumption1,43 W
System interfaceBus typeParallel dual-port memory
Connector type80 pin connector (SAMTEC FSI-140-03-G-D-AB)
Pin distance/pin width0.45 mm/0.55 mm
Dual-port-memory size64 KB (16 address lines), where 16 KB used by firmware (14 address lines, lowest 16 KB)
Width for the data access to the Dual-Port Memory (DPM)8/16 bit
Communication interfaceCommunication standard (protocol)PROFIBUS
Interface typeRS-485, potential-free
ConnectorD-Sub, 9-pin
Diagnostic interfaceTypeUSB or UART
ConnectorSignal at host interface. Available only if integrated in host system
DisplayDisplaySYS System Status, green: RUN, yellow: RDY
COM0, COM1 Communication status, both green/red
EnvironmentAmbient temperature range for operation-20 °C … +70 °C
Ambient temperature range for storage-10 °C … +70 °C
DeviceDimensions (L x W x H)Length: 68.2 mm / 60 mm (with / without DSUB socket), Width: 53.4 mm (at front panel) / 50.4 mm (body), Height : 25.2 mm (at front panel) / 19.2 mm (body)
Weight<80 g
Housingclosed module
Protection classIP40
Mounting/InstallationVia milled footprint holes in the carrier board and retaining brackets. No mounting accessories required.
Mounting/pulling cyclesmax. 10
Configuration Configuration softwareSYCON.net
ConformityRoHSyes
Reachyes
UL certificationUL typecURus
UL fileE334100
Conformance with EMC directivesCE Signyes

Omschrijving

Bestelnummer

Exchangeable module dual-port memory - PROFIBUS DP,NJ 100DN-DP 1623.400/DPM

Flyers

Hilscher embedded solution brochure Versie: 2013-10

Manuals

netJACK design guide Versie: V07
netJACK user manual Versie: V08

Technische documentatie

netJACK datasheet Versie: 10_2022
vraag meer informatie over toepassingen aan via ons contactformulier.