Gateway CC-Link Slave to PROFINET IO Device (Coupler)

Gateway CC-Link Slave to PROFINET IO Device (Coupler)

Cost-optimized entry level Gateway for simple conversions

netTAP 50 is a protocol converter for simple conversions. netTAP 50 converts 1-port Real-Time Ethernet, fieldbus and serial automation protocols. Slave to slave or slave to master conversions are supported. As a master, netTAP 50 provides full master functionality to one slave device only. This makes it easy to integrate a single field device into any higher-level network.

The design impresses with a cost-optimized, compact hardware implementation being reduced to the elementary requirements of a protocol converter. The converter addresses market segments which set the focus on cost savings. The cost-reduced design combined with its countless conversion possibilities makes netTAP 50 an attractive gateway in terms of price and universality.

  • Transparent data conversion in dual slave operation mode
  • I/O data individually mapable
  • Short I/O data conversion time lower than 20 ms
  • Extremely space-saving compact design
  • Loadable Firmware for flexible use of other conversions
  • With Ethernet diagnostic and configuration port
Communication controllerCommunication controllernetX 50
Integrated MemoryRAM8 MB SDRAM
FLASH4 MB serial Flash
Power supplySupply voltage24 V ± 6 V DC
Current consumption at 24 V (typically)72 mA / 150 mA (with short circuit at the output of PROFIBUS)
Typical power consumption1,8W
Communication interface 1Communication interfaceCC-Link V2.0 and 1.1
Interface typeRS-485
Connector typeCOMBICON, 5-pin
Communication interface 2Communication interfaceEthernet
Interface type100 BASE-TX or 10 BASE-T, isolated
Connector typeRJ45, 1 * RJ45
Permitted ambient conditionsAmbient temperature (operation)0 … +60 °C
Relative humidity (operation)no condensation allowed
DeviceDimensions (L x W x H)100 x 26 x 66 mm (without connector)
Weightappr. 80 g
Degree of protectionIP 20
Mounting typeon DIN rail EN 60715
ConfigurationConfiguration softwareSYCON.net

Omschrijving

Bestelnummer

NT 50-CC-EN - Gateway CC-Link to PROFINET IO1758.100

Technische documentatie

netTAP-50_Datasheet_05-2020_GB.pdf Versie: 05-2020
vraag meer informatie over toepassingen aan via ons contactformulier.