PROFIBUS connector, 90°, screw terminal with ATEX approval

The connector is plugged directly into the PROFIBUS interface (SUB-D socket, 9-pin) of the PROFIBUS participants. The PROFIBUS cables are connected using 4-pin screw terminals. A slide switch is used to set whether the connector is to be used as a node or at the segment end. The switch can also be operated in the installed condition. The setting is clearly visible.
For improved EMC compatibility, the housing of the plug is metalized.
The PROFIBUS connector is quickly mounted and has integrated, connectible terminating resistors.

Additional participants can be connected via the integrated PG interface.

  • Metalized housing
  • No parts that can be lost
  • Integrated switchable terminating resistor
  • 90° cable outlet
  • ATEX approval (II 3 G Ex nA II T4)
  • Proven screw terminal
  • The PROFIBUS connectors are also available in packs of 10 or 50
  • Optional integrated PG interface
Cable outletVertical cable outlet, suitable for FastConnect stripping tool
PROFIBUS interface
Transmission ratemax. 12 Mbps
ConnectionSUB-D, 9 pin
Terminating resistorResistor combination integrated and switchable using slide switch
PG connection socket SUB-D, 9-pin
PROFIBUS bus cable60/75 °C copper cable up to 1.0 mm2
Connector typeterminal strips
Maximum outside diameter8.0 mm
Voltage supply+4.75 … +5.25 V DC (must come from the device)
Current drawMax. 12.5 mA



PROFIBUS connector, 90°, screw terminal with ATEX approval without PG700-973-0BA12
PROFIBUS connector, 90°, screw terminal with ATEX approval with PG700-973-0BB12