PROFIBUS Gateways / Couplers

With the new DP/PN coupler, a simple and uncomplicated connection of PROFIBUS to PROFINET is possible. It allows data transfer between a PROFIBUS master and a PROFINET controller. The maximum size of the transmitted data is 244 bytes of input…

Historically developed networks generally cause problems at some time. Where previously a classical fieldbus like CANopen, PROFIBUS, or DeviceNet was the preferred network, Ethernet-based bus systems are preferred nowadays. However, a protocol change from one fieldbus to another also occurs…

High-End Gateway for demanding conversions netTAP 100 is the protocol converter for sophisticated conversions and supports 2-port Real-Time Ethernet to serial, Fieldbus to Fieldbus, Real-Time Ethernet to Fieldbus and Real-Time Ethernet to Ethernet conversions. It supports slave and master functionality…

Cost-optimized entry level Gateway for simple conversions netTAP 50 is a protocol converter for simple conversions. netTAP 50 converts 1-port Real-Time Ethernet, fieldbus and serial automation protocols. Slave to slave or slave to master conversions are supported. As a master,…

The maximum size of the transmitted data is 244 bytes of input data and 244 bytes of output data. The DP/DP coupler is configured in the S7 software or with a GSD file.

On the PROFIBUS-DP, the DP/CAN coupler is a normal participant. The I/O data of the CANopen? participants is shown in the PROFIBUS in a transparent and freely configurable manner. The DP/CAN coupler is integrated in the hardware configurator with a…

On the PROFIBUS-DP, the DP/CAN coupler is a normal participant. The I/O data of the CANopen? participants is shown in the PROFIBUS in a transparent and freely configurable manner. The DP/CAN coupler is integrated in the hardware configurator with a…

The PG socket integrated in the housing allows connection of additional devices. The connection to the PC is established with the 3 m high-speed USB cable. The NETLink® USB Compact is supplied with voltage by the USB bus; on the…

In general, connection to each MPI/PROFIBUS terminal of the bus system or directly at the interfaces of active and passive participants is also possible. The PG socket integrated in the connector housing allows connection of additional devices. The integrated web…

In general, connection to each MPI/PROFIBUS terminal of the bus system or directly at the interfaces of active and passive participants is also possible. The PG socket integrated in the connector housing allows connection of additional devices. The integrated web…

In general, connection to each MPI/PROFIBUS terminal of the bus system or directly at the interfaces of active and passive participants is also possible. The PG socket integrated in the connector housing allows connection of additional devices. The integrated web…