Gateway PROFIBUS DP to Serial (ASCII) or Modbus RTU
Gateway PROFIBUS DP to Serial (ASCII) or Modbus RTU
€308,00
Quickly available!
netTAP 50 connects to communication networks and acts as a Gateway for simple conversions between one Real-Time Ethernet protocol (1-port) and one fieldbus protocol or one serial automation protocol as well as between one fieldbus protocol and one serial automation protocol. netTAP 50 supports Slave-zu-Slave- and Slave-zu-Master-conversions. As a master, netTAP 50 provides only one single slave device with the full master function. This makes it easy to integrate a single field device into any higher-level network.
The design of the netTAP 50 convinces by its compact hardware and is reduced to the basic requirements of a protocol converter. The converter is directed to market segments for which the factor costs has priority. This makes the netTAP 50 an attractively priced and universally applicable gateway that offers a wide variety of conversion options.
NT 50-DP-RS supports the following protocols:
- PROFIBUS DP Slave
- PROFIBUS DP Master
- Serial (programmable)
- Serial (ASCII)
- Modbus RTU Master
- Modbus RTU Slave
- Integrates a Modbus RTU device into a PROFIBUS DP network, and vice versa
- Transfers ASCII telegrams from/to a PROFIBUS DP Master or Slave
- Extremely space-saving compact design
- Loadable Firmware for flexible use of other conversions
- With diagnosis and configuration interface via Ethernet
| Communication controller | Communication controller | netX 50 | |
| Integrated Memory | RAM | 8 MB SDRAM | |
| FLASH | 4 MB serial Flash | ||
| Power supply | Supply voltage | 24 V ± 6 V DC | |
| Current consumption at 24 V (typically) | 72 mA / 150 mA (with short circuit at the output of PROFIBUS) | ||
| Typical power consumption | 1,8W | ||
| Communication interface 1 | Communication interface | PROFIBUS DP | |
| Interface type | RS-485, optically isolated | ||
| Connector type | D-Sub female, 9-pin | ||
| Communication interface 2 | Communication interface | Serial interface | |
| Interface type | RS-232, RS-422, RS-485 | ||
| Connector type | RJ45, Ethernet and serial interface together in one connector | ||
| Permitted ambient conditions | Ambient temperature (operation) | 0 … +60 °C | |
| Relative humidity (operation) | no condensation allowed | ||
| Device | Dimensions (L x W x H) | 100 x 26 x 66 mm (without connector) | |
| Weight | appr. 80 g | ||
| Degree of protection | IP 20 | ||
| Mounting type | on DIN rail EN 60715 | ||
| Configuration | Configuration software | SYCON.net | |
Description |
Order number |
| NT 50-DP-RS - Gateway PROFIBUS DP to RS-232/422/485 | 1758.100 |
| Configuration of Gateway and Proxy Devices | Versie: Rev. 12 |
| netTAP_NT_50_-_Gateway_Devices_UM_18_EN-2.pdf | Versie: Rev. 18 |
| netTAP-50_Datasheet_05-2020_GB.pdf | Versie: 05-2020 |