Revolution PI – Expansion modules

Wherever electrical circuits need to be controlled and switched, a relay output module such as the RevPi RO is used. This module makes it easy to switch on and off motors, valves, lighting systems, ventilation systems and other devices. It…

In addition to the dedicated digital and analog I/O expansion modules, there is also an I/O module for Revolution Pi that has digital inputs/outputs as well as analog inputs/outputs. The RevPi MIO adds 8 analog inputs, 8 analog outputs and…

By using RevPi Con M-Bus VHP you can equip your RevPi Connect with 169MHz Wireless M-Bus. The expansion module has an SMA socket at the front for connecting an antenna (antenna not included in the scope of delivery). This expansion…

By using RevPi Con M-Bus you can equip your RevPi Connect with 868MHz Wireless M-Bus. The expansion module has an SMA socket at the front for connecting an antenna (antenna not included in the scope of delivery). This expansion module…

By using the RevPi Con CAN expansion module you can equip your RevPi Connect with CAN bus capability. The expansion module has a 4-pin connector to the CAN bus connection. The expansion module is supplied with power directly via the…

Using the analog I/O – module RevPi AIO your RevPi base module can be expanded by 4 analog inputs, 2 analog outputs and 2 RTD input channels. This expansion module is connected to your base module by the means of…

Using the digital output – module RevPi DO your Revolution Pi base module can be expanded by 16 digital outputs. This expansion module is connected to your base module by the means of the overhead PiBridge plug.

By using this digital input expansion module your Revolution Pi base module can be expanded by 16 digital inputs. This expansion module is connected to your base module by the means of the overhead PiBridge plug.

Using the digital I/O – module RevPi DIO your Revolution Pi system can be expanded by 14 digital inputs and 14 digital outputs. This expansion module is connected to your base module by the means of the overhead PiBridge plug.

The KUNBUS-GW gateways consists of two modules each, which contain the respective protocol and are fitted with a common interface for the data exchange. Each module is integrated into the respective network as a Slave. The data is exchanged via…