Netwerk Gateways

The gateway netTAP 151 transmits IO data bidirectionally between any two industrial Real-Time Ethernet networks. It is the ideal solution for installations with heterogenous networks or such of the same kind to exchange data across given network boundaries. With more…

The PN/CAN gateway SAE J1939 can be used as a complete SAE J1939 device or for the simulation and diagnosis of an SAE J1939 network. The data of the Parameter Groups (PGNs) can be exchanged directly in the I/O data…

The PN/CAN gateway “CANopen Slave” enables the coupling of machines with CANopen bus to machines with PROFINET network and represents a freely configurable full CANopen Slave Device at the CAN bus. On the PROFINET network the PN/CAN gateway “CANopen Slave”…

On the PROFINET network, the PN/CAN gateway is a PROFINET I/O device and supports transfer rates up to 100 Mbps full duplex; and up to 1 Mbps on the CAN bus. The I/O data of the CAN participants is transparently…

Direct PROFIBUS PA Segment Integration into Modbus TCP Control Systems

Direct Integration of PROFIBUS DP and PA Segments into PROFINET Control Systems

High-End Gateway for demanding conversions netTAP 100 is the protocol converter for sophisticated conversions and supports 2-port Real-Time Ethernet to serial, Fieldbus to Fieldbus, Real-Time Ethernet to Fieldbus and Real-Time Ethernet to Ethernet conversions. It supports slave and master functionality…

Cost-optimized entry level Gateway for simple conversions netTAP 50 is a protocol converter for simple conversions. netTAP 50 converts 1-port Real-Time Ethernet, fieldbus and serial automation protocols. Slave to slave or slave to master conversions are supported. As a master,…

On the PROFIBUS-DP, the DP/CAN coupler is a normal participant. The I/O data of the CANopen? participants is shown in the PROFIBUS in a transparent and freely configurable manner. The DP/CAN coupler is integrated in the hardware configurator with a…

On the PROFIBUS-DP, the DP/CAN coupler is a normal participant. The I/O data of the CANopen? participants is shown in the PROFIBUS in a transparent and freely configurable manner. The DP/CAN coupler is integrated in the hardware configurator with a…

In general, connection to each MPI/PROFIBUS terminal of the bus system or directly at the interfaces of active and passive participants is also possible. The PG socket integrated in the connector housing allows connection of additional devices. The integrated web…

Direct PROFIBUS PA Segment Integration into PROFINET Control Systems