Netwerk couplers

With Gateway NT 151-CCIES-RE/PNS you can easily and efficiently connect a CC-Link IE Field based control system with a PROFINET based control system and their networks. More than 1400 bytes of cyclic input and output data can be exchanged transparently…

With the PN/EtherNetIP Coupler, a simple and uncomplicated connection of a PROFINET machine to an EtherNet/IP machine is possible. The PN/EtherNetIP Coupler allows data transmission between a PROFINET controller and an EtherNet/IP PLC. Received input data on one side of…

Simple and uncomplicated connection of a PROFINET network with a ModbusTCP network is possible with the PN/ModbusTCP Coupler. The PN/ModbusTCP Coupler enables data transmission between a PROFINET controller and ModbusTCP participants. Received input data on one of the network sides…

With the PN/PN Coupler, a simple and uncomplicated connection of two separate PROFINET networks is possible. The PN/PN Coupler enables data transmission between two PROFINET controllers. A PROFINET IO device is on both PROFINET network sides. Received input data on…

With the new DP/PN coupler, a simple and uncomplicated connection of PROFIBUS to PROFINET is possible. It allows data transfer between a PROFIBUS master and a PROFINET controller. The maximum size of the transmitted data is 244 bytes of input…

The KUNBUS-GW gateways consists of two modules each, which contain the respective protocol and are fitted with a common interface for the data exchange. Each module is integrated into the respective network as a Slave. The data is exchanged via…