PROFINET / EtherCAT Coupler

Name: PROFINET / EtherCAT Coupler
SKU: 700-161-3EC02
Availability: InStock

With the PN/EtherCAT Coupler a simple and uncomplicated connection of a PROFINET machine to an EtherCAT machine is possible. The PN/EtherCAT Coupler allows the data transfer between a PROFINET controller and an EtherCAT master.

Received output data on one of the network sides are made available to the PLC on the other network side as input data. The cyclic I/O data exchange comprises a maximum of 600 bytes per direction and takes place as fast as possible without any handling blocks.

The configuration of the coupler and the compilation of the I/O data is carried out for both network sides in the engineering tool of the respective PLC (e.g. TIA Portal from Siemens, CODESYS from the CODESYS Group or TwinCAT from Beckhoff). Additional configuration software is not required.
To integrate the coupler into the respective engineering tool, a GSDML file is provided for the PROFINET side and an ESI file for the EtherCAT side. For the configuration of the I/O data to be transferred, the coupler provides 100 slots and a large number of I/O modules with different data types and sizes. Usually it is sufficient to perform and commission this I/O configuration manually for the PROFINET side only, since the common engineering tools of the EtherCAT side allow reading in and accepting the current I/O configuration of the coupler.

Configuration by means of GSDML and ESI file in the engineering tool of the respective PLC
No further software necessary.
Automatic module configuration on the EtherCAT side possible
Up to 600 byte input & 600 byte output data
100 slots for IO data
Redundant power supply
Galvanic isolation of the networks
Diagnostics web page

Vraag direct een offerte aan!

PROFINET / EtherCAT Coupler

Snel leverbaar!

Request more information

General information
	Dimensions (DxWxH)	32.5 x 58.5 x 76 mm
	Weight	Approx. 135 g
PROFINET interface (X1)
	Connection	2 x RJ45, integrated switch
	Protocol	PROFINET IO as defined in IEC 61158-6-10
	Transmission rate	100 Mbps full duplex
	I/O image size	max. 600 bytes of input and output data
	Features	Media redundancy (MRP),automatic addressing, topology detection (LLDP, DCP), diagnosis alarms PROFINET conformance class B (in preparation)
EtherCAT interface (X2)
	Connection	2x RJ45 IN/OUT
	Protocol	EtherCAT as of IEC 61158-x-12
	Transmission rate	100 Mbps
	Features	Automatic process data configuration Support of 'CANopen over EtherCAT' (CoE) Object dictionary according to 'Modular Device Profile' (MDP) Support of 'SDO Info' and 'Complete Access'
Power supply
	Operating voltage	24 V DC (18 - 28 V DC)
	Current draw	max. 180 mA
	Power dissipation	max. 4.7 W
Ambient conditions
	Ambient temperature	0 °C to 60 °C
	Transport and storage temperature	-20 °C to 80 °C
	Relative air humidity	95 % r H without condensation
	Protection rating	IP 20
	Approvals	CE