Function modules

Input voltages (3 phases + N) can be connected directly to the module. In addition to general status information, the module’s configuration can be used to show up to 7 readings in the input image table. In the event of…

In terms of hardware, the module’s SSI is implemented as a point-to-point connection as defined in the RS-422 standard. Moreover, in order to avoid ground loops, opto-isolators are used to achieve full electrical isolation. Excellent noise immunity is ensured by…

Counters are used to detect pulses that are faster than a controller?s cycles, i.e., signals that the controller will be unable to detect properly and that therefore need to be pre-processed. The counter module detects the edges of 24 V…

Counters are used to detect pulses that are faster than a controller?s cycles, i.e., signals that the controller will be unable to detect properly and that therefore need to be pre-processed. The counter module detects the edges of 24 V…

Counters are used to detect pulses that are faster than a controller?s cycles, i.e., signals that the controller will be unable to detect properly and that therefore need to be pre-processed. The counter module detects the edges of 24 V…

The weighing module serves the purpose of measuring and processing signals from weight, torque, or force sensors. The weighing module enables the direct connection of a load cell in the strain gauge full bridge circuit (voltage-fed bridge circuit). The feed…