PROFINET Gateways / Couplers

With the PN/EtherCAT Coupler a simple and uncomplicated connection of a PROFINET machine to an EtherCAT machine is possible. The PN/EtherCAT Coupler allows the data transfer between a PROFINET controller and an EtherCAT master. Received output data on one of…

With Gateway NT 151-CCIES-RE/PNS you can easily and efficiently connect a CC-Link IE Field based control system with a PROFINET based control system and their networks. More than 1400 bytes of cyclic input and output data can be exchanged transparently…

The gateway netTAP 151 transmits IO data bidirectionally between any two industrial Real-Time Ethernet networks. It is the ideal solution for installations with heterogenous networks or such of the same kind to exchange data across given network boundaries. With more…

The MQTT protocol has become established in recent years as a simple transmission protocol for messages in the IoT world. MQTT stands for “Message Queue Telemetry Transport Protocol” and is an OASIS standard. The MQTT protocol always uses a central…

On the PROFINET network, the PN/CAN gateway is a PROFINET I/O device and supports transfer rates up to 100 Mbps full duplex; and up to 1 Mbps on the CAN bus. The I/O data of the CAN participants is transparently…

The PN/CAN gateway SAE J1939 can be used as a complete SAE J1939 device or for the simulation and diagnosis of an SAE J1939 network. The data of the Parameter Groups (PGNs) can be exchanged directly in the I/O data…

The PN/CAN gateway “CANopen Slave” enables the coupling of machines with CANopen bus to machines with PROFINET network and represents a freely configurable full CANopen Slave Device at the CAN bus. On the PROFINET network the PN/CAN gateway “CANopen Slave”…

On the PROFINET network, the PN/CAN gateway is a PROFINET I/O device and supports transfer rates up to 100 Mbps full duplex; and up to 1 Mbps on the CAN bus. The I/O data of the CAN participants is transparently…

With the PN/EtherNetIP Coupler, a simple and uncomplicated connection of a PROFINET machine to an EtherNet/IP machine is possible. The PN/EtherNetIP Coupler allows data transmission between a PROFINET controller and an EtherNet/IP PLC. Received input data on one side of…

Simple and uncomplicated connection of a PROFINET network with a ModbusTCP network is possible with the PN/ModbusTCP Coupler. The PN/ModbusTCP Coupler enables data transmission between a PROFINET controller and ModbusTCP participants. Received input data on one of the network sides…

With the PN/PN Coupler, a simple and uncomplicated connection of two separate PROFINET networks is possible. The PN/PN Coupler enables data transmission between two PROFINET controllers. A PROFINET IO device is on both PROFINET network sides. Received input data on…

With the new DP/PN coupler, a simple and uncomplicated connection of PROFIBUS to PROFINET is possible. It allows data transfer between a PROFIBUS master and a PROFINET controller. The maximum size of the transmitted data is 244 bytes of input…

The KUNBUS-GW gateways consists of two modules each, which contain the respective protocol and are fitted with a common interface for the data exchange. Each module is integrated into the respective network as a Slave. The data is exchanged via…

netTAP 100 connects to communication networks and acts as a Gateway for sophisticated conversions between one Real-Time Ethernet protocol (2-port) and one fieldbus protocol or one serial automation protocol as well as between two fieldbus protocols as well as between…

netTAP 50 connects to communication networks and acts as a Gateway for simple conversions between Ethernet/IP, PROFINET or ModbusTCP (1-port) and one fieldbus protocol or one serial automation protocol as well as between one fieldbus protocol and one serial automation…

netLINK PROXY integrates any PROFIBUS DP slave into a superordinate PROFINET network. Designed as a connector, the device is plugged directly onto the PROFIBUS DP interface of the DP Slave and connected to the PROFINET network via the RJ45 socket….

Direct PROFIBUS PA Segment Integration into PROFINET Control Systems