Exchangeable Module PCI Express – Real-Time Ethernet

The universal Exchangeable Module netJACK with its PCI Express interface addresses in particular the embedded market with high-performance CPUs like Intel Atom®. Alternatively, there are versions with a traditional dual-port memory and a fast serial SPI interface.

All variants have the compact design of a closed IP40 module which can be mounted without using tools. Additional costs for the exchangeable module will not incur because connector and mounting rails are designed as contact areas or cut-outs on the host system.

netJACK can be mounted quickly and easily – right before shipment or later by the end customer.

With netJACK, customers can realize the full range of communication solutions, e. g. for drives, HMI systems, or ident systems. Additional functions, e. g. soft-PLC, visualization or applications developed by the customer are possible, too. For customer-specific requirements, Hilscher offers a cost-optimized Design and Production Service.

Due to the Hilscher network controller netX, a 10-year delivery guarantee is granted.

  • Universal interface of Real-Time Ethernet (Master or Slave) in closed IP40 housing
  • Host connection via PCI Express
  • One hardware for all Real-Time Ethernet protocols
  • Simple plug-in installation without tools
  • No additional components required for mounting and connecting to the carrier board
ProductPart number1625.100
Brief descriptionExchangeable Module PCI Express
Communication controllernetXnetX 100
Integrated MemoryRAM8 MB SDRAM
FLASH4 MB serial Flash EPROM
Power supply and currentSupply voltage+3.3 V ± 5 % DC
Typical/maximum current750mA
Typical power consumption2,5W
System interfaceBus typePCI-Express, One-Lane-Port
Connector type40 pin connector (SAMTEC FSI-120-03-G-D-AB)
Pin distance/pin width0.45 mm/0.55 mm
Transmission rate 1,5 GHz
Communication interfaceCommunication standard (protocol)Ethernet
Interface type100 BASE-TX, isolated or 10 BASE-T (depending on loaded firmware), Half duplex/Full duplex (at 100 MBit/s if supported by protocol), Auto-Negotiation (if supported by protocol), Auto-Crossover (if supported by protocol)
Connector2xRJ45
Diagnostic interfaceTypeUSB
ConnectorSignal at host interface. Available only if integrated in host system
DisplayDisplaySYS System Status, green: RUN, yellow: RDY
COM0, COM1 Communication status, both green/red
TX/RX0, TX/RX1, Ethernet activity status, yellow
LINK0, LINK1, Ethernet link status, green
EnvironmentAmbient temperature range for operation-20 °C … +65 °C
DeviceDimensions (L x W x H) Length 62 mm (with RJ45 connector), 60 mm (without RJ45 connector), width 53.4 mm (at front panel), 50.4 mm (at body), height 25.2 mm (at front panel), 19.2 mm (at body)
Weight<80 g
Housingclosed module
Protection classIP40
Mounting/InstallationVia milled footprint holes in the carrier board and retaining brackets. No mounting accessories required.
Mounting/pulling cyclesmax. 10
Configuration Configuration softwareSYCON.net
ConformityRoHSyes
Reachyes
UL certificationUL typecURus
UL fileE334100
Conformance with EMC directivesCE Signyes

Omschrijving

Bestelnummer

Exchangeable Module PCI Express - Real-Time Ethernet, NJ 100EN-RE/PNM V3 1625.100/PNM V3

Flyers

Hilscher embedded solution brochure Versie: 2013-10

Manuals

netJACK design guide Versie: V07
netJACK user manual Versie: V08

Technische documentatie

netJACK datasheet Versie: 10_2022
vraag meer informatie over toepassingen aan via ons contactformulier.