FLEXtra SLIM Ethernet-Switch unmanaged 5-Ports

94,33

In stock – ready to ship!

The unmanaged Ethernet switch impresses with its lightweight yet robust design. Thanks to its ultra-compact and space-saving design, it is also suitable for control cabinets with limited space, such as those found on extensive conveyor belt systems in the field.

The switch is suitable for DIN rail mounting and is very easy to integrate into your network. Once plugged in, it is immediately ready for operation thanks to the simple plug & play installation. No configuration is necessary.

The 5-port unmanaged Ethernet switch is suitable for PROFINET networks. The LLDP (neighbourhood detection) and PTCP (time synchronisation) functions are handled correctly with the switch in accordance with the PROFINET standard. The unmanaged Ethernet switch therefore complies with PROFINET Conformance Class A. Connect up to 5 Ethernet devices at 10 or 100 Mbit/s.

  • Store-and-Forward architecture
  • 10Base-T/100Base-TX
  • Full-/Half-Duplex
  • Autonegotiation
  • Auto MDI/MDI-X (IEEE 802.3u Auto crossover support)
  • LLDP & PTCP Delay-Traffic blocking (for PROFINET networks)
  • PROFINET Conformance Class A
  • QoS-Priority-Queues: 2 per port
  • 1K MAC address lookup table
  • 448K bit packet buffering
  • max forwarding packet length 1552 bytes
General information
Dimensions (DxWxH)35.1 x 25 x 109 mm
WeightApprox. 115g
LAN interface
Number5
ConnectionRJ45
Transmission rate10/100 Mbit/s
Type10Base-T/100Base-TX
Full-/Half-Duplex (Autonegotiation)
Auto MDI/MDI-X
IEEE Autocrossover
PROFINET Conformance Class A
Status indicator
Power display1 LED
Ethernet-Status10 LEDs
Power supply
Voltage supply24 V DC (18...30 V DC)
Current drawmax. 60 mA at 24 V DC
Power dissipation1,5 W
Ambient conditions
Ambient temperature-25 °C … +60 °C
Transport and storage temperature-40 °C … +85 °C
Relative air humidity95 % r H without condensation
Protection ratingIP20
Mounting positionas desired
AppovalsCE

Description

Order number

FLEXtra SLIM Ethernet-Switch unmanaged 5x RJ45 10 / 100 Mbit700-842-5ES01

Frequently Asked Questions

The switch fully complies with PROFINET Conformance Class A (CC-A) standards. It is built to correctly handle and forward LLDP (neighborhood detection) and PTCP (time synchronization) frames without delaying or blocking critical traffic. This guarantees that basic cyclic automation data exchanges between your PLC and field devices remain completely stable and undisturbed.

Yes. The switch features full Autonegotiation and Auto MDI/MDI-X support on all ports. It automatically detects the optimal transmission rate (10 or 100 Mbit/s) and handles crossover cabling internally. This true plug-and-play installation allows for immediate operation right out of the box without requiring any software tool or engineering effort.

The unmanaged FLEXtra SLIM switch serves as an ideal, cost-effective network component inside a local security zone (such as an isolated machine cell). You use this switch to interconnect the internal field devices locally.To safely route data traffic crossing into higher-level factory networks, you pair the switch with an upstream Helmholz WALL IE Industrial NAT Gateway & Firewall. The WALL IE acts as the official, secure conduit boundary, isolating the IP ranges, preventing network overload, and blocking unauthorized external access via its integrated packet filters.

The unmanaged switch is the most cost-effective choice for machine modules, standalone equipment, or small sub-networks that only require standard cyclic PROFINET Class A data exchange. It reduces upfront component costs and completely eliminates commissioning time, making it highly efficient for repeatable machine building projects where advanced diagnostics (like SNMP or MRP rings) are handled at a higher tier.