netFIELD IO-Link Wireless Bridge Class A
netFIELD IO-Link Wireless Bridge Class A
€148,00
Quickly available!
Hilscher’s IO-Link technology platform netFIELD Device connects simple as well as complex sensors and actors seamlessly to industrial Real-Time Ethernet networks.
The scope of netFIELD Device is now broadened by introducing the innovative IO-Link Wireless communication. Machine builders and factory operators have new possibilities to gather sensor data and monitor their plants.
The netFIELD Device IO-Link Wireless Class A Bridge serves as the counterpart to Hilscher’s IO-Link master and is directly connected to its corresponding sensors. The small coupling device for the radio communication only needs a 24V power connection to provide fast and reliable wireless communication.
Hilscher’s netFIELD Devices are IP67-rated, preventing the ingress of dust and water. A complex installation within control cabinets is not necessary.
- Enabling wireless technology for IO-Link devices
- Compatible to IO-Link standards with comparable reliability
- Firmware-Update "Over The Air"
- Scan mode, simple pairing of discoverable IO-Link devices
- Wireless range of point-to-point communication up to 10 meter
- Robust IP67 design - No ingress of dust or water
| Product | |||
| Part number | 1912.103 | ||
| Product name | NFD-BRIDGE-IOLSA\W | ||
| Description | IO-Link Wireless Class A Bridge, protected against dust and moisture. | ||
| Function | The bridge connects a wired IO-Link Device (Class A) via radio to an IO-Link Wireless Master and supplies it with power. | ||
| Power supply | |||
| Supply voltage | 24 V DC, –25%/+30% (18 V DC … 31.2 V DC) SELV/PELV or limited power supply (Class 2, according to IEC 61010-1-2010) Voltages higher than 32 V can damage the device permanently. Voltages below approx. 18 V may cause malfunction. | ||
| Output voltage | Corresponds to the supply voltage (overcurrent protection at signal L+) | ||
| Power consumption (typical) | 21 mA (at 24 V , without power consumption of the connected IO-Link Device) | ||
| Maximum input current (continuous) | 1.021 A | ||
| Maximum output current (short-term peak current, max. 30 min) | 1.221 A | ||
| Connector | M12, A-coded, plug | ||
| Reverse polarity protection | Not present | ||
| IO-Link connector | |||
| Communication | IO-Link Version 1.1 | ||
| Radio connection | 1 Wireless point - IO-Link Wireless Device | ||
| Antenna | 1, internal, isotropic | ||
| Frequency range | 2.4 GHz | ||
| Maximum output power of the radio signal | 10 dBm | ||
| Pairing | Push button | ||
| Bridge | |||
| Dimensions with M12 connectors (L x W x H) | 66.6 mm x 35.6 mm x 35.6 mm | ||
| Dimensions without M12 connectors (L x W x H) | 41.6 mm x 35.6 mm x 35.6 mm | ||
| Weight | Approx. 38 g (without optional bracket) | ||
| Protection class | IP67 | ||
| Mounting | Mount (optional) or attach to the IO-Link Device | ||
| Installation location | In the radio range of the IO-Link Wireless Master and close to the connected IO-Link Device The installation location must not be higher than 2000 m above sea level. | ||
| Displays | |||
| Power LED | Green | ||
| Status LED | RGB | ||
| Environmental conditions | |||
| Ambient temperature (operation) | –25 °C … +60 °C | ||
| Ambient temperature (storage) | –40 °C … +85 °C | ||
| Relative humidity | 5% … 95% | ||
| CE | |||
| Standards | EN 301489 EN 300328 EN 62479 EN 61326:1 | ||
| RoHS | Yes | ||
| Reach | Yes | ||
| Compliance | |||
| CE marking | Yes | ||
| UKCA marking | Yes | ||
| EMV Compliance | |||
| Emission EN 61000-6-4 | EN 55016-2-3 (Radiated emission),EN 55022 (Radio emission) | ||
| Immunity EN 61000-6-2 | EN 61000-4-2:2009 (Electrostatic discharge immunity test), EN 61000-4-3:2006 + A1:2008 + A2:2010 (Radiated, radio-frequency, electromagnetic field immunity test), EN 61000-4-4:2004 + A1:2010 (Electrical fast transient/burst immunity test) EN 61000-4-5:2006 (Surge immunity test) EN 61000-4-6:2009 (Immunity to conducted disturbances, induced by radio-frequency fields) | ||
| Shock and vibration resistance | |||
| Vibration resistance against sinusoidal vibrations | IEC 60068-2-6 | ||
| Vibration resistance (random broadband noise) | IEC 60068-2-64 | ||
| Shock resistance | IEC 60068-2-27 |
Description |
Order number |
|
| netFIELD IO-Link Wireless Bridge Class A | NFD-BRIDGE-IOLSA\W | 1912.103 |
