Periphery module DO4R (4 relay outputs 230V) / 3A
Periphery module DO4R (4 relay outputs 230V) / 3A
€116,63
Quickly available!
This periphery module PM-DO4-R is a compact periphery module for 4 relay outputs 230V AC (4 potential separated contacts) with 4 glass bulb fuses 5x20mm (1 for each relay).
Single digital inputs for 24V, relay outputs for 230V as single potential free contacts or configurable digital in-/output modules for 24V ? each of the <20mm smart periphery units contains state-LEDs, a 45? angled and space-saving connect area and can be labeled wit customized logos. INSEVIS stands for permanent innovation, even at the digital signals layer too: As example the backreadable digital outputs can be configured ba software, if the output or input shall be used. So this DIO16-module can be used as a spare module for some I/Os to spend it during commissioning the application.
- insertion stripe with description field for every signal
- cage-clamp connector with 2 lift arms or bolt flanges on side
| Load voltage L+ | 24 V (17 V ... 30 V, connected by device supply) |
| Load voltage L+ on the relay | 30VDC(max.), 250VAC (max.) |
| Current consumption | 45 mA from L+ (max.) |
| Power dissipation | 0,8 W at 24V (max.) |
| Digital outputs | 4 |
| Diagnostic LEDs | 4 green |
| Topography | 4 potential separated contacts with fuse and RC (between Pins 1-5, 2-6, 3-7, 4-8) |
| Input delay | 5 ms ... 10 ms (typ.) |
| Output delay | 2 ms ... 5 ms (typ.) |
| Switching capacity of contacts at inductive load | 3A (max.) |
| at ohmic load | 3A (max.) |
| Max. switching frequency mechanical | 50 Hz |
| with load | 5 Hz |
| Typ. number of switching operations mechanical | 20Mio |
| with 3A | 100.000 |
| Broken wire detection | no |
| Error diagnostic | no |
| Potential separation to PLC | yes |
| Short circuit proof | yes - melting fuse in glass bulbs 5x20mm (3A fast) |
Description |
Order number |
| Periphery module DO4-R | PM-DO4R-02 |
| Connector 1x8 pin | E-CON08-00 |
