RevPi Compact

The new RevPi Compact complements the KUNBUS Revolution Pi family from end October 2020. It is a powerful and cost-optimized compact controller based on the Raspberry Pi 3+ Compute Module with extensive connection options and functions.

Sensors and actuators can each be connected via eight digital and analog inputs as well as eight digital and two analog outputs. Thanks to two Ethernet interfaces, each with its own MAC address, the device can be simultaneously integrated into two different networks. In addition, four USB A ports and a 4-pole RS485 interface are integrated.

As with all other components in this product range, KUNBUS is also pursuing the open source concept with the RevPi Compact, allowing users to implement their projects with maximum design freedom. Due to its flat design, it is easily possible to install the device in a distribution cabinet, e.g. for building automation. RevPi Compact is configured using the PiCtory browser application, which is already pre-installed. The operating system is a customized Raspbian with real-time patch. Individual applications can be programmed via Node-RED, Python, directly in C etc. The popular industrial protocols Modbus RTU and Modbus TCP are supported by default. Optionally (at extra charge) ready-made, professional software solutions like Codesys or logi.CAD can also be used.

  • Broadcom BCM2837B0 mit 4-Kern-Prozessor ARM Cortex-A53
  • 1 GByte RAM
  • 8 GB eMMC
  • 2 x RJ45 10/100 Ethernet (using separate MAC adresses)
  • 4 x USB A (total current draw from all sockets max. 2 A)
  • 1 x RS485 max. 500 kbps, termination switchable by software (not galvanically isolated)
  • 8 x digital Inputs
  • 8 x digital Outputs
  • 8 x analog Inputs
  • 2 x analog Outputs
Housing dimensions (H x W x D)90 x 160,6 x 58 mm
Housing typeDIN rail housing
Power supplytyp. 24 V DC (10.8 … 28.8 V DC)
Interfaces2 x RJ45 10/100 Ethernet (using separate MAC adresses) 4 x USB A (total current draw from all sockets max. 2 A) 1 x HDMI socket 1 x Micro-USB (solely for image transfer to eMMC) 1 x RS485 max. 500 kbps, termination switchable by software (not galvanically isolated) 8 x digital Inputs Input threshold: At 24 V DC compatible to type I and III sensors according to EN 61131-2 8 x digital Outputs High-side with 10 k pull-down resistor, short-circuit proof (internal temperature switch-off), potential separation system/digital outputs. Maximum current load: Per output: 500 mA @ 24 V DC (resistive load!). Sum of all outputs: max. 2 A @ 24 V DC (resistive load!) 8 x analog Inputs 0-10 V DC, single ended, 16 Bit at piControl, 21 Bit raw value, software switchable current source 2.5 mA 2 x analog Outputs 0-10 V, short-circuit proof, protection against backfeeding, 8-bit resolution, 1 % accuracy, max. current load 10 mA (10 V DC @ 1 k)
ProcessorBroadcom BCM2837B0 mit 4-Kern-Prozessor ARM Cortex-A53
RAM1 GByte
Flash8 GByte eMMC
ConformityRoHS
Markings and certificationsCE

Omschrijving

Bestelnummer

RevPi Compact100272

Flyers

RevPi-Compact_Flyer_EN.pdfVersie:

Technische documentatie

Datasheet_RevPi_Compact.pdfVersie:
vraag meer informatie over toepassingen aan via ons contactformulier.