netANALYZER Real-Time Ethernet Analyzer

The netANALYZER is a tool for the simple analysis of Real-Time Ethernet networks. A capture-hardware for recording the telegrams in the network as well as a graphical user software for Windows with extensive analysis functions are included within the delivery. Of course, the netANALYZER hardware can also be used in combination with other analysis programs such as Wireshark.

With netANALYZER and the add-on software netANALYZER Scope, you can measure data at any time in the intuitive graphical interface with oscilloscope functions, e.g. process values, network load, communication events and telegram jitter, without affecting the Ethernet network or the PLC.

To narrow down the number of sporadic errors, netANALYZER box supports the autonomous operation without PC. A telegram can thus be recorded “quickly” in the field at the push of a button. For trouble shooting, the extensive trigger function enables the netANALYZER to remain in a plant for a while. If trigger events occur, the netANALYZER automatically generates telegram snapshots that can later be interpreted with the netANALYZER Scope software.

  • Extensive analysis for Real-Time Ethernet systems
  • Passive device without affecting the network or PLC
  • Intuitive graphic display
  • Station lists, alarms, process values, network load, and telegram jitter
  • Endless recording with freely definable triggers
ProductProduct nameNANL-B500G-RE
Part number7313.100
DescriptionnetANALYZER portable Device with Gigabit Ethernet PC interface for Real-Time Ethernet and all 10/100BASE-TX Ethernet Networks (Stand-alone Device)
FunctionPassive Ethernet analyzer for RT-Ethernet systems - analyzes the data in a communication link and captures the incoming Ethernet frames. Additionally, events of four digital inputs can be captured.
Power supply and currentSupply voltage24 V DC ±6 V DC
Maximum current (typically) 700 mA (at 24 V)
Typical power consumption16.8 W
Power connectorCOMBICON, 3-pin, maximum permitted cable length: 3 m. Alternatively connector for barrel plug, maximum permitted cable length: 3 m. Only alternative use permitted!
System interfaceBus type / PC interfaceGigabit Ethernet RJ45 socket, required connection to the PC‚ UPLINK 1 Gb/s: Ethernet RJ45 socket (1 Port)
Recording interface USB 2.0 (hard disc or memory stick), max. 500 mA or external supply
Autonomous operationData rate approx. 50 % network load when recording on one TAP
Measurement interfaceConnector 4 x RJ45 socket, channels/ports: 2/4 communication channels with integrated TAP (TAP A, TAP B), and each with two ports for capturing data in both directions (together 4 Ports: Port 0 to Port 3)
Digital signals4x GPIO In-/Output 3.3 V and 24 V for capturing digital signals or using as trigger output
Time stamp± 5 ns measurement accuracy, 1 ns resolution
Operating elementsSwitch/ButtonPower Switch, REC Button to enable data recording in autonomous mode
Permitted ambient conditionsAmbient temperature range for operation 0 °C ... +55 °C (Air flow during measurement: 0,5m/s)
Ambient temperature range for storage-10 °C ... +70 °C
Humidity range10 % … 95% relative humidity, no condensation permitted
Pollution degreeThe device must be used in a pollution degree 2 environment.
Altitude0 m … 2000 m
DeviceDimensions (L x W x H)115 x 62 x 173 mm
Weight approx. 820 g
Conformity RoHS Yes
Conformance with EMC directivesCE sign Yes
UKCA signYes
EmissionEN IEC 61000-6-4 / BS EN IEC 61000-6-4
ImmunityEN IEC 61000-6-2 / BS EN IEC 61000-6-2
Electrostatic discharge (ESD) according to EN IEC 61000-4-2 / BS EN IEC 61000-4-2 (Air discharge method)± 8 kV, Criterion B
Electrostatic discharge (ESD) according to EN IEC 61000-4-2 / BS EN IEC 61000-4-2 (Contact discharge method)± 6 kV, Criterion B
Radiated RF, according to EN IEC 61000-4-3 / BS EN IEC 61000-4-3: 80-1000 MHz, 10 V/m, 80 % AM / 1 kHzCriterion A
Radiated RF, according to EN IEC 61000-4-3 / BS EN IEC 61000-4-3: 1.0-2.7 GHz, 10 V/m, 80 % AM / 1 kHzCriterion A
Fast transient interferences (Burst) according to EN IEC 61000-4-4 / BS EN IEC 61000-4-4 (Communication and data lines)± 2.2 kV, Criterion B
Surge voltage, according to EN IEC 61000-4-5 / BS EN IEC 61000-4-5 (Communication and data lines)1 kV, Criterion A
Conducted RF, according to EN 61000-4-6 / BS EN IEC 61000-4-6: 0,15-80 MHz, 10 V, 80 % AM / 1 kHzCriterion A



NANL-B500G-RE - netANALYZER Real-Time Ethernet Analyzer, Box7313.100
LIC/NANL/SA - NANL-B500G-RE add-on, autonomous operation without PC8582.060


Operating instruction manual Versie: V03
User manual Versie: Rev/ 27

Technische documentatie

datasheet Versie: 10-2022
vraag meer informatie over toepassingen aan via ons contactformulier.