RevPi Connect 4
powered by Raspberry Pi Compute Module 4
RevPi Connect 4
The fourth generation of the RevPi Connect is equipped with the Raspberry Pi Compute Module 4.
Its quad-core Arm Cortex-A72 processor and with up to 8 GB of DDR4 RAM, the RevPi Connect 4 gets a significant performance boost over its predecessors and enables use in entirely new application areas. Due to its modular design and integrated interfaces, the RevPi Connect 4 can be used for a wide range of tasks, be it as a pure industrial PC, industrial controller, edge gateway or IIoT device.
- powered by Raspberry Pi Compute Module 4
- Customized 64-Bit Raspberry Pi OS
- Modular & flexible
- Two Gigabit Ethernet RJ45 ports ensure fast data transmission and low latency times.
- Two USB-A sockets with USB 3.2 Gen 1 allow a transfer speed with 5 Gbps.
- Optionally, the device has WLAN or Bluetooth connectivity.
Vraag direct een offerte aan!
RevPi Connect 4
| Housing dimensions (H x W x D) | 96 x 45 x 110,5 mm |
| Housing type | DIN rail housing (for DIN rail version EN 50022) |
| Housing material | Polycarbonate |
| Weight | approx. 197 g / 224 g (incl. connectors) |
| Protection class | IP20 |
| Power supply | 10.8 ... 28.8 V DC |
| Max. power consumption | 20 W (incl. 2 x 900 mA USB load) |
| Allowable operating temperature | -25 ... +55 °C |
| Allowable storage temperature | -40 ... +85 °C |
| Max. relative humidity (at 40 °C) | up to 93 % (non-condensing) |
| Interfaces | 2 x USB A 3.2 Gen 1 |
| 2x RJ45 GBit Ethernet | |
| 1 x RS485 screw-type terminal | |
| 1 x Micro-USB (solely for image transfer to eMMC) | |
| 1 x Micro-HDMI 2.0a (4K) | |
| 2 x PiBridge (connectors at the left and at the right side) | |
| 1x RP-SMA socket for connecting an external WLAN/BT antenna (2.4 / 5 GHz), not available on Article No. 100376 and 100378 | |
| Connectors | 1 x 4-pole screw-type terminal for RS485 |
| 1 x 4-pole screw-type terminal for relay contact and signal input | |
| 1 x 4-pole screw-type terminal for power supply | |
| Processor | Broadcom BCM2711, quad-core Arm Cortex-A72 |
| Clock rate | 1.5 GHz |
| Processor cooling | Passive with heat sink |
| RAM | 2 GB LPDDR4 (Article No.: 100376, 100377), 4 GB LPDDR4 (Article No.: 100378, 100379), 8 GB LPDDR4 (Article No.: 100380) |
| Flash memory | 8 GB (Article No.: 100376, 100377), 32 GB (Article No.: 100378, 100379, 100380) |
| WLAN / Bluetooth | 2.4 GHz, 5.0 GHz IEEE 802.11 b/g/n/ac wireless, Bluetooth 5.0, BLE |
| Number of digital input channels | 1 |
| Digital input type | 24 V DC control voltage (e.g. for power-good signal of a UPS) |
| Input thresholds | approx. 10 V DC (0 -> 1) resp. 7 V DC (1 -> 0), input current 2.4 mA (according to IEC 61131-2) |
| Number of digital output channels | 1 |
| Output type | opto-decoupled solid state relay, normally open, max. 30 V, 300 mA DC, any polarity |
| Software interface of input and output | Via GPIOs and process image. |
| Hardware watchdog | Watchdog in RTC device, freely configurable watchdog character device |
| Compatible modules for system expansion | All RevPi IO modules can be connected via the PiBridge system bus. |
| Up to 5 modules can be connected as well to the left as to the right side of the device. | |
| EMC interference emission | according to IEC 61000-6-4 Emission standard for industrial environments |
| EMC immunity | according to IEC 61000-6-2 Immunity standard for industrial environments |
| RTC buffer | CR2032 lithium battery, lifetime approx. 10 years |
| Optical indicator | 6 status LEDs: 5 x red/green/blue, freely programmable, 1 x red/green |
| Conformity | CE, UKCA |
Omschrijving |
Bestelnummer |
| RevPi Connect, No WLAN, 2 GB RAM, 8 GB eMMC | 100376 |
| RevPi Connect, WLAN, 2 GB RAM, 8 GB eMMC | 100377 |
| RevPi Connect, No WLAN, 4 GB RAM, 32 GB eMMC | 100378 |
| RevPi Connect, WLAN, 4 GB RAM, 32 GB eMMC | 100379 |
| RevPi Connect, WLAN, 8 GB RAM, 32 GB eMMC | 100380 |
| RevPi Connect, 8 GB RAM, 32 GB eMMC | 100395 |
| datasheet RevPi Connect 4 | Versie: 1 |
